-
The PO landed on a Monday morning
-
Mistake one: the $166 order that turned into a $610 problem
-
Mistake two: 'steel toe' is a feature, not a standard
-
Mistake three: 'runs a little small' is not a measurement
-
The checklist that came out of it
-
June 2021: the order that landed correct
-
The part I actually want to say out loud
-
Three things I'd hand to anyone buying PPE for a small crew
The PO landed on a Monday morning
March 2019. $2,800 on the purchase order, six people on the floor, and every piece of PPE the shop owned had to come out of that number — boots, glasses, gloves, coveralls, ear plugs.
I ran purchasing for a 3,000 sq ft fabrication shop that built custom steel railing. We welded, we cut, we ground. That winter, an OSHA inspector had spent a morning walking a shop two towns over, clipboard in hand, and my boss came back from a trade breakfast saying we weren't going to be the next one on that list.
I'd been doing purchasing for four years by then. Steel pricing, freight, tooling lead times — I knew all of it. PPE I did not know. I could tell you what a ton of HR coil cost that week. I could not tell you what a Z87+ marking was.
That gap cost me roughly $3,100 over the following two years. All the figures below come from our own invoices and freight records — they'll vary by region, distributor, and year, so treat them as scale, not as quotes.
Mistake one: the $166 order that turned into a $610 problem
The first item I bought was also the simplest. Safety glasses. Everyone needs them, they're cheap, and I assumed you buy them the same way you buy shop towels.
I typed "safety glasses near me" into Google at 7:40am, called the closest place that came up, and drove over before lunch. Twenty-four pairs of wrap-around glasses at $4.20 each, plus six pairs of the nicer-looking ones for the welders at $11. Total came to $166.80. I felt efficient. That feeling lasted about three weeks.
Our quarterly self-audit caught it. None of the frames had a Z87+ marking. Under ANSI/ISEA Z87.1, that marking isn't decoration — the plus sign means the eyewear passed the high-velocity impact test rather than just the basic impact test. Basic impact protection isn't what you want in a shop where people run a 4.5" angle grinder at chest height.
Then it got worse.
Two of my guys wear prescription glasses. I didn't know it at the time, but prescription safety glasses aren't something you pick up in a store. They're built to a prescription, in a frame that's separately rated, usually in a lab, and they take two to three weeks. In the meantime your guy either wears his regular glasses under a face shield or he doesn't work. Neither is a good answer when there's a deadline on the rail package.
So that $166.80 became a $610 problem: the wrong glasses, one eye exam our insurance only partly covered, a rush fee on the second lens order, and about six weeks where two people were on light duty.
The frustrating part wasn't the money. It was that I'd spent a morning being efficient instead of being careful, and the shop paid for the difference.
Mistake two: 'steel toe' is a feature, not a standard
September 2019. Boots.
Same mistake, different item. I searched "where to buy work boots near me," got a list of retailers within ten miles, and assumed all of them were selling the same category of thing.
They weren't. Steel toe is a feature. Certified safety footwear is a standard. ASTM F2413-18 is the U.S. standard, and a compliant boot carries a marking inside the tongue — I/75 C/75 means it passed impact testing at 75 ft-lb and compression testing at 2500 lb. A boot can look identical to a certified one and have no marking at all. Nobody at the counter is going to volunteer that.
I measured feet with a Brannock device I borrowed from a shoe store, wrote down six sizes, and ordered.
Four guys couldn't get their feet in comfortably. Two said the boot felt "wrong at the heel."
Here's what I learned: boot sizing does not track sneaker sizing. Half my crew had been wearing sneakers a half size small for years. One guy was a size and a half off from what he'd been telling me his whole adult life.
I sent them back. Restocking fee. Reordered through a distributor willing to break a case so I could get six different sizes instead of six of one. That's when Portwest steel toe boots entered the picture — not because someone pitched me on the brand, but because their distributor had a real EU/UK/US conversion chart and would actually split a case. Honestly, I wasn't expecting much at that point.
Total damage: $890. Between the restocking fee, second-order freight, and two weeks of guys wearing old boots with a steel cap taped inside — which is exactly as dumb as it sounds — that one stung.
And the two weeks between hitting submit and the pallet landing? Awful. What if the conversion chart was wrong too? What if the split case came in short? You don't relax until the shrink wrap is off and everybody's walking around in them.
Mistake three: 'runs a little small' is not a measurement
February 2021. Coveralls.
I was smarter by now. Conventional wisdom says read the reviews before you buy, so I read every Portwest S999 Euro Work Coveralls review I could find. The consensus was remarkably consistent: good value, polycotton holds up to weld spatter, runs a little small — order up if you're between sizes.
So I ordered up. Twelve coveralls, $720.
Eight of them came back wrong anyway.
"Runs a little small" is not a measurement. Euro sizing on that garment maps to a completely different body scale than the U.S. numeric sizes my crew was used to quoting. Ordering up from a size that was already wrong just got me a slightly larger wrong size.
Everything I'd read said reviews would tell me what I needed. In practice, reviews told me about value, comfort, durability, whether the zipper feels cheap. They told me nothing about fit. Fit is numbers. Fit is a tape measure around a chest and an inseam, run through the manufacturer's own chart, then checked a second time by someone who isn't me.
We caught it on day 9 of a 14-day return window. Eight went back. Two stayed because a guy had already worn one for a full shift and covered it in grinding dust, and I wasn't going to argue over $120. Two got "kept as spares" by people who are, it turns out, larger than they told me.
$720 and a return window I nearly missed. Three times, the same class of error: I measured by feel instead of by number.
The checklist that came out of it
After the third rejection in March 2021, I sat down and wrote a one-page list. It's taped inside the cabinet where we keep the PPE binders. It has not changed much since.
The rule that does the most work is the first one: markings before price.
- Eye protection: Z87+ on the lens or frame. No marking, no purchase.
- Safety footwear: ASTM F2413 I/75 C/75 marking inside the tongue, or EN ISO 20345 S1P/S3 if we're buying Euro spec.
- Hi-vis: EN ISO 20471 class rating on the label, matched to what the site actually requires.
- FR garments: standard and arc rating, not the color and not the price.
Then the process rules:
- Sizes come off a tape measure, not memory. Two people measure, one person writes it down, twice.
- Any European size gets converted through the manufacturer's own chart and cross-checked against inches.
- Two questions for the rep before ordering: Can I mix sizes in one case? and What's the exchange window on sizing?
- One sample garment or one trial pair before any order over $500.
Under 29 CFR 1910.132(d)(1), the employer must "select, and have each affected employee use, the types of PPE that will protect the affected employee from the hazards identified in the hazard assessment." Selected. Not bought.
That distinction is the whole checklist in one sentence. Bought is a transaction. Selected is a judgment about whether the marking, the fit, and the standard actually match the hazard in front of you.
June 2021: the order that landed correct
$2,400, single distributor — boots, coveralls, hi-vis vests, glasses, the lot. Every size came off a tape measure. Every item got its marking checked before it went into the cart.
It arrived correct. First time.
Since then we've caught somewhere around 40 potential errors on that page — a vest in the wrong class, a boot with no marking, a coverall listed in EU sizing only. We've had zero size-driven returns since Q3 2022.
The part I actually want to say out loud
In 2019 our entire PPE budget was $2,800. When I called around, most suppliers didn't call back. One told me flat out their minimum order was $5,000. Another quoted list price and never followed up.
The distributor I ended up with did three things differently. They broke a case so I could order six different boot sizes. They emailed me the actual size chart PDF instead of telling me to check the website. They shipped two sample coveralls so I could put them on two different bodies before committing to twelve.
That order was $2,400. For them it probably registered as a rounding error in the month.
We've spent somewhere between $26,000 and $30,000 a year on PPE with that distributor ever since. Not because they were the cheapest — they weren't. Because in 2019 they treated a six-person shop the same way they treated their larger accounts. Small doesn't mean unimportant. It means untested.
Three things I'd hand to anyone buying PPE for a small crew
Reviews are for value and comfort. They are not for fit. Fit is a tape measure and a manufacturer's chart, and no amount of five-star reviews will substitute for either.
The marking is the product. OSHA 29 CFR 1910.132 requires employers to select PPE that actually protects against the identified hazard, and to pay for it themselves. A $4 pair of glasses with no Z87+ marking isn't a cheaper version of compliant eyewear. It's plastic.
A $2,400 order deserves the same checklist as a $240,000 one. Especially when it's the first one with a new supplier.
The boss asked me once why I still keep that page taped inside the cabinet after five years. I told him I don't trust my own memory. Neither should anyone else who's buying gear that has to stop a grinding wheel.